Sales team on WhatsApp Chat now

Nitro cold brew dispenser buying guide for cafés and offices

Desktop Nitro Cold Brew Dispenser NTCOF-DT1F / DT2F
Pictured: Desktop Nitro Cold Brew Dispenser (NTCOF-DT1F / DT2F)

Short answer

Pick a desktop nitro dispenser (about 30 L/h cooled capacity in our NTCOF-DT range) for cafés and offices, and a freestanding cabinet (170 L/h listed for the NTCOF-RC3F) for high-volume venues. Then confirm the nitrogen supply method, tap count and the keg format you will batch in.

What a nitro dispenser does #

A nitro dispenser infuses chilled coffee, tea or other drinks with nitrogen and pours them through a restrictor tap, producing a creamy texture and a cascading head. The machine must keep the drink cold, introduce nitrogen and control the pour.

Desktop or freestanding? #

Cooled capacity tells you how much product the unit can bring to serving temperature per hour — compare it with your peak-hour sales.

TypeModelTapsCooled capacitySize
DesktopNTCOF-DT1F / DT2F1 or 230 L/h, 5–12 °C205 × 600 × 530 mm (screen version)
FreestandingNTCOF-RC3F2170 L/h700 × 720 × 880 mm

Dry cooling vs water bath #

The NTCOF-DT units list aluminium dry cooling, which avoids topping up and cleaning a water bath. Ask how the cooling block is cleaned and how long it recovers after a rush.

Nitrogen supply #

Nitrogen can come from a cylinder or from an on-board generator, depending on design. One of our desktop listings describes the unit as free of a gas cylinder; confirm the method for the exact variant you order, along with any consumables.

Batching and kegs #

Most shops brew cold brew concentrate in batches and connect kegs to the dispenser. Our stainless kegs come in 5, 10 and 15 L sizes; the 10 L keg measures 225 × 225 × 362 mm.

Product figures in this article are taken from our model specifications. Regulatory information is general guidance, not legal advice — confirm requirements with your local authority or compliance adviser.

From this guide

Products mentioned

Keep reading

More articles