Sales team on WhatsApp Chat now

Post-mix vs pre-mix soda systems: how a soda fountain really works

Soda Fountain Tower with Under-Counter Chiller TS4CD
Pictured: Soda Fountain Tower with Under-Counter Chiller (TS4CD)

Short answer

A post-mix system stores concentrated syrup and mixes it with chilled carbonated water at the moment of dispense; a pre-mix system serves a finished drink that was carbonated and mixed before it reached the venue. Post-mix needs a carbonator, a chiller and a syrup supply, but uses far less storage space per serving.

Post-mix and pre-mix in one minute #

In a pre-mix system the beverage arrives finished — already carbonated and at its final syrup-to-water ratio — usually in kegs or tanks. The dispenser only has to cool and pour it.

In a post-mix system the venue stores syrup (often in bag-in-box packs) and the dispenser makes the drink on demand: it chills water, carbonates it in a carbonator and blends it with syrup at the valve. Because syrup is concentrated, one box replaces many litres of finished drink.

The parts inside a post-mix fountain #

Whether it is a countertop fountain, a tower with a remote chiller or a bar gun, the same building blocks appear:

  • Carbonator — a pump and pressure vessel that dissolves CO₂ into chilled water. The TS4CD chiller, for example, lists a 2.24 L carbonator.
  • Ice bank or cold plate — the refrigeration system builds a block of ice around coils so the unit can cool drinks quickly during peaks. Listed ice banks in our range run from 4.5 kg to 21 kg.
  • Syrup lines and pumps — move syrup from bag-in-box or tanks to the valves.
  • Valves, tower or gun — meter and mix syrup and carbonated water at a set ratio.
  • CO₂ supply — a cylinder and regulator feeding the carbonator.

Countertop fountain, tower or bar gun? #

Choose the format by where heat and noise can go and how drinks are served:

FormatWhere the cooling sitsTypical fitExample in our range
All-in-one countertop fountainInside the dispenserSites without under-counter space8-flavour fountain: 17–21 kg ice bank, 1–5 °C
Tower + under-counter chillerUnder the counterClean front counters, self-serviceTS4CD: 3–8 valves, 9–10 kg ice bank, 1–5 °C
Bar gun + under-counter chillerUnder the barCocktail and hotel barsSG*F: 14.5–18 kg ice bank, 2–6 °C

Sizing questions to answer before you request a quote #

A supplier can only size a soda system correctly if you share these numbers:

  • Number of flavours plus plain soda water — this sets valve or button count.
  • Peak-hour drinks and cup size — this drives ice-bank and carbonator capacity.
  • Voltage and frequency on site (220–240 V / 50 Hz or 110 V / 60 Hz).
  • Syrup format available locally (bag-in-box or tank) and the ratio recommended by the syrup brand.
  • Distance from chiller to tower or gun, which affects line length and insulation.

Day-to-day care #

Post-mix quality depends on water, CO₂ and hygiene. Follow the syrup brand’s ratio guidance, keep nozzles and diffusers clean, and keep the condenser area of the chiller ventilated so the ice bank can rebuild between rushes.

Product figures in this article are taken from our model specifications. Regulatory information is general guidance, not legal advice — confirm requirements with your local authority or compliance adviser.

From this guide

Products mentioned

Keep reading

More articles